If you are looking for a durable air compressor for sale, you are in the right place. I considered this Makita MAC2400 Air Compressor because of its power. It has a 2.5 HP 4-pole motor that makes me work productively since I can do lots of work without difficulty.
There is also no tripping since it operates on the low amp. Continue reading this Makita MAC2400 air compressor review to learn more. I was also impressed with it because of the discharge tubing made of fine copper. Even when I worked hard, the heat is evenly distributed, and there is only a small amount of water entering the tank.
Features of Makita MAC2400 Air Compressor
Quality Motor and Pump
These are the most basic parts of an air compressor. From my experience with Makita MAC2400, I realized that it has a world-class motor and a long-lasting pump. Therefore, I was able to see improvement in my quality of work whenever I used it. This air compressor also has 1,720 rotations per minute or RPM. This is not too high nor low.
When the motor has minimal RPM, it means that it generates more heat. As a result, there are lesser chances of causing damages due to burning. This model also did not cause any problem with my circuit breakers since it works on an outlet with 15 AMP, so it can operate its 12.3 AMP motor easily.
I have tried inexpensive and consumer-grade air compressors in the past. I noticed that these are usually made with a narrow bore pump. The problem with narrow bore pumps is that it takes in less air when it compresses air into its tank. A narrow bore pump has to work twice longer and harder compared with Makita MAC2400 when I tried to fill a 2-gallon tank.
Moreover, the stroke frequency does not cause overheating of the pump. As a result, it increases the air compressor’s survival time. With its big-bore pump, it is much quicker to replenish the air in the tank. It is because this unit from Makita can deliver more compressed air.
Operating on a noise level of 79 dB, it is not expected for the Makita MAC2400 to be very quiet. Nevertheless, this noise level is quieter when compared to a blender. I can continue talking to other people without the need to turn off the device.
There are oil-less and oil-filled pumps for air compressors. For professional work in construction, I prefer using an oil-lubricated pump. Because the piston on the cylinder slides continuously, there is more friction. If not oil-lubricated, this could cause the unit to have friction, causing overuse, excessive noise, and overheating. There is also a limit to the duty cycle when I work with oil-less pumps. I could not use it when I am doing professional work.
Aside from having a big-bore pump, the Makita MAC2400’s pump is oil lubricated. That is why I consider it the ideal air compressor in construction. If you plan to use your air compressor for professional work, I do not recommend universal oil-less pumps.
Holds Much Air
I find the Makita MAC2400’s 4.2 CFM high enough to provide enough productivity, even with the other most home tools I have. Most of the DIY projects I have were easy when I used this compressor. The tank size provides air continuously even when I used it with my impact wrenches or other high-draining tools. Because of this, it is great for regular use.
With all its specs, I think this air compressor is great for professional woodwork projects. Its output rating can operate air tools commonly utilized by carpenters without any hassle. The extra big pump ensures that it gives very good performance at any job site. According to a Makita MAC2400 review, it gives more productivity and faster recovery time. This is due to the good maximum air pressure and tank.
This twin-stacked air compressor from Makita is sturdy and robust. It weighs 77 lbs making it heavier when compared to other air compressors in the market. That is why carpenters who do not move much purchase this. For me, it was still portable though a bit heavier. The quality parts and metal structure makes it long-lasting.
My Experience with Makita MAC2400 Air Compressor
Though it is not very quiet, I like the noise level of Makita MAC2400 Big Bore Air Compressor. Compared to other models I have tried, this is the one that makes the least noise. A completely silent unit is not possible since it is a compressor. I could continue a conversation while using it without the need to raise my voice.
Another thing I liked about this product is the vibration level. Its rubber feet is effective in lessening the vibrations. When used, the compressor did not shake around too much. I also read from some reviews that they liked this feature.
Though it weighs 77 lbs, I was able to use it well. It is not lightweight but still portable. I could move it around without difficulty and experiencing physical problems. I also did not mind since I know what makes it heavy is its metal construction. The rubber-molded handles make it easier to work and move this compressor around.
- Operates on a lower noise
- Has improved durability because of the oil-lubricated pump
- Quality but affordable materials and construction
- Has a high CFM rating
- Offers more flexibility because of the 2 hose outlets
- There is protection from bumps and falls because the components are encased in a metal roll cage.
- Not very portable compared to other air compressors due to the weight
- Some extension cables are not compatible with this unit.
Finally, this Makita MAC2400 is worth buying. Based on the reviews and the experience I shared, you have an idea that this model has a lot to offer. When you want to use other power tools with it and a compressor that works quietly and comes from a reliable name, you better get this air compressor now.
If you would like to get the reviews of other popular power and hand tools, kindly visit our reviews page.